General Product informations

Price range: 25,00 € through 115,00 € excluding Tax

Estimated delivery dates: Nov 20, 2025 - Jan 1, 2026

Additional Information

Weight 0,1 kg
Dimensions 3 × 18 × 9 cm
Connection Type

Connect and Play, Panel Only, Plug and Play

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Bottom Middle Panel: Replica Boeing 737 Acrylic Flight Deck Module

Step into the world of authentic flight simulation with the Simbay Bottom Middle Panel, a meticulously crafted replica of the Boeing 737 lower middle overhead panel. Designed explicitly for flight enthusiasts and commercial flight schools, this panel elevates your cockpit setup by blending realism with superior quality. Made from two durable acrylic sheets—the base layer at 3mm and the front at 5mm thickness—this panel emulates the feel and function of the original aircraft component. Painted in the distinctive Boeing iron gray RAL 7011, it adds an authentic visual appeal that commands attention.

With all annunciators, annunciator boxes, knobs, and buttons included, the Bottom Middle Panel creates an immersive experience. These push buttons and rotary knobs faithfully replicate real aircraft controls, enhancing training or simulation sessions without compromise. Backlighting is another standout feature; a warm white backlight improves visibility and adds a realistic glow that mirrors the actual cockpit’s ambiance. This backlight runs on a separate 12-volt connector ensuring ease of integration.

Why Simbay’s Boeing 737 Replica Panel Matters

When investing in flight simulation accessories, accuracy and build quality can’t be overlooked. This overhead aircraft simulator module fulfills these critical demands thanks to its precise size of 177mm by 84.5mm and carefully engineered layout. The use of acrylic sheets ensures durability while offering an attractive iron gray painted finish that resists wear and preserves aesthetic integrity through intense use hours.

The rear side features a printed circuit board (PCB) with an IDC connector that maps each pin to a specific function—allowing seamless connection and perfect integration with your simulation setup. For added convenience and consistency, a detailed data sheet guiding the C&P (Connect & Play) version wiring is included, providing users full control over setup and maintenance.

Key Benefits of the Simbay Bottom Middle Panel

  • Authentic Design: Exquisite replica of Boeing 737’s cockpit instrument panel, enhancing the training environment.
  • Superior Material Quality: Crafted from layered acrylic sheets painted in official Boeing gray for both durability and style.
  • Fully Featured Controls: Includes authentic annunciators, annunciator boxes, push button and rotary knobs for realistic operation.
  • Warm White Backlighting: Illuminates buttons and panels to mimic real aircraft cockpit lighting conditions.
  • Easy Integration: Equipped with a PCB featuring IDC connectors and labeled pin functions for smooth setup.

Frequently Asked Questions

Is this panel compatible with all Boeing 737 simulation setups?

Yes, it’s designed as a replica compliant with common Boeing 737 overhead flight deck modules, making it compatible with most flight simulators and cockpit setups.

How is the warm white backlighting powered?

The panel and buttons backlight runs through a separate 12 volts connector for consistent and user-friendly lighting.

Are the knobs and buttons functional or just cosmetic?

They function as push buttons and rotary knobs, allowing authentic tactile feedback during simulation.

What is included in the package?

The package includes the panel, all annunciators, annunciator boxes, knobs, and buttons—the full overhead flight deck interface.

Can I get technical support for installation?

Yes, the provided data sheet for wiring and connections ensures straightforward assembly, and additional support is available for troubleshooting.

Take your flight simulation to the next level with this faithful Boeing 737 Bottom Middle Panel. Order today and experience the thrill of realistic aircraft control at your fingertips!

Related Products

Panel Only

This set includes the front and back panels, all annunciators, knobs, and switch guards.
Note: No electronic components are included. You will need to purchase switches, toggle switches, rotary switches, encoders, or potentiometers separately.

Connect and Play

This is a fully functional unit that must be connected via the IDC connector pins on the back of the PCB to a controller board. Programming is required.
Pin layout information is either printed on the PCB or provided in a separate datasheet.

Plug and Play

This version comes pre-programmed and USB-ready for use with your preferred flight simulation software.
Simply plug it in, install the provided configuration files, and you’re ready to fly!

Power Supply Note:
Because the panels can be daisy-chained using their power connectors, single-panel products do not include a 12V power adapter. Only one adapter is required to power your entire custom cockpit setup. The power supply is used solely for the backlighting, not for the product’s core functions.

Knobs

All knobs are high-quality, resin 3D-printed components with realistic designs. They are supplied with a D-shaft fitting.
For modifications or custom requirements, please contact our support team.

Gauges

The gauges are powered by SG90 servo motors, compatible with most available controller boards. Each unit includes one or two pre-mounted servo motors.

Calibration must be done via your software or firmware.

Where specified, we use 28BY stepper motors with a ULN2003 driver board.

Electronics

Electronics are available as complete packages or individual components. When selecting a color or type, you will receive the specified quantity of the chosen product.

PCBs

PCB Only: Includes just the bare PCB. You can order components separately.

PCB + Electronic Components: Includes a blank PCB plus all necessary components for you to solder.

Soldered PCB: Fully soldered and tested by us. Ready to connect to your controller board and program.

Panneau seulement

Cet ensemble comprend les panneaux avant et arrière, tous les voyants, boutons et protections de commutateur.
Remarque : aucun composant électronique n’est inclus. Vous devrez acheter séparément les commutateurs, les commutateurs à bascule, les commutateurs rotatifs, les encodeurs ou les potentiomètres.

Connecter et jouer

Il s’agit d’une unité entièrement fonctionnelle qui doit être connectée via les broches du connecteur IDC à l’arrière du circuit imprimé à une carte de contrôleur. Une programmation est nécessaire.
L’agencement des broches est soit imprimé sur le circuit imprimé, soit fourni dans une fiche technique séparée.

Plug and Play

Cette version est pré-programmée et prête pour l’USB pour une utilisation avec le logiciel de simulation de vol de votre choix.
Il suffit de le brancher, d’installer les fichiers de configuration fournis et vous êtes prêt à voler !

Remarque sur l’alimentation électrique :
Comme les panneaux peuvent être chaînés en utilisant leurs connecteurs d’alimentation, les produits à panneau unique n’incluent pas d’adaptateur secteur 12V. Un seul adaptateur est nécessaire pour alimenter l’ensemble de votre installation de cockpit personnalisée. L’alimentation électrique est utilisée uniquement pour l’éclairage de fond, pas pour les fonctions de base du produit.

Boutons

Tous les boutons sont des composants 3D imprimés en résine de haute qualité avec des conceptions réalistes. Ils sont fournis avec un adaptateur en forme de D.
Pour les modifications ou les exigences personnalisées, veuillez contacter notre équipe d’assistance.

Jauges

Les jauges sont alimentées par des moteurs servo SG90, compatibles avec la plupart des cartes de contrôleur disponibles. Chaque unité comprend un ou deux moteurs servo pré-montés.

L’étalonnage doit être effectué via votre logiciel ou votre firmware.

Lorsque cela est spécifié, nous utilisons des moteurs pas à pas 28BY avec une carte pilote ULN2003.

Électronique

Les composants électroniques sont disponibles sous forme de paquets complets ou de composants individuels. Lors de la sélection d’une couleur ou d’un type, vous recevrez la quantité spécifiée du produit choisi.

Cartes de circuits imprimés

Carte de circuit imprimé seulement : Inclut uniquement la carte de circuit imprimé nue. Vous pouvez commander les composants séparément.

Carte de circuit imprimé + composants électroniques : Inclut une carte de circuit imprimé vierge ainsi que tous les composants nécessaires pour que vous puissiez les souder.

Carte de circuit imprimé soudée : Entièrement soudée et testée par nos soins. Prête à être connectée à votre carte de contrôleur et à être programmée.

0