Additional Information
| Weight | 0,5 kg |
|---|---|
| Dimensions | 8 × 25 × 22 cm |
| Connection Type | Connect and Play, Panel Only, Plug and Play |
Price range: 75,00 € through 200,00 € excluding Tax
| Weight | 0,5 kg |
|---|---|
| Dimensions | 8 × 25 × 22 cm |
| Connection Type | Connect and Play, Panel Only, Plug and Play |
Only logged in customers who have purchased this product may leave a review.
Are you a flight enthusiast or part of a commercial flight school looking to elevate your aviation simulator experience? The Simbay G1000 Side Panel Cessna 172 replica is designed just for you. Crafted from robust acrylic sheets painted in gray RAL7011 (iron gray), this side panel mirrors the authentic control panel of the iconic Cessna 172, making your flight training or simulator setup incredibly realistic and immersive.
The replica consists of two layers of acrylic: a sturdy 3mm thick bottom sheet and a 5mm thick upper front sheet, perfectly blending durability with an authentic look. Designed with precision, this panel includes all the annunciators, annunciator boxes, push buttons, and rotary knobs you’d expect from the original, adding genuine tactile feedback for hands-on flight control simulation. Included are also the red On-Off switches for easy operation, adding the fine details critical for flight training accuracy.
This Flight Simulator Cockpit component caters to those who want the best of both form and function, combining aesthetic precision with functional realism. The warm white backlighting enhances visibility and adds to the genuine cockpit feel, especially in low-light conditions. Wiring and connectivity are streamlined with a 12-volt backlighting connector and an IDC connector on the PCB’s backside, where each pin is labelled and assigned to panel-specific functions, simplifying integration into your existing setup.
Whether you are upgrading your flight training equipment or building a Cessna 172 aviation simulator from scratch, this side panel set is an essential piece for an authentic flight experience. The ‘Panel Only’ set conveniently includes all knobs, buttons, and switches, allowing you to quickly install it without sourcing additional parts.
Training with the Simbay G1000 Side Panel Cessna 172 means enhanced muscle memory and operational familiarity with a real aircraft control panel layout. Users report that interacting with realistic annunciators and functional buttons improves retention and engagement during practice flights.
The sturdy acrylic construction ensures this side panel withstands frequent use while maintaining a sleek, professional appearance. The warm white backlighting reduces eye strain and increases panel readability, critical for long simulation sessions or training exercises conducted during evening hours.
This side panel answers the common flight simmers’ question: “How can I get a realistic, reliable Cessna 172 control panel replica for my simulator?” The answer is clear with this purpose-built panel that delivers form, function, and easy integration.
A: The set includes two acrylic sheets painted gray, all annunciators, annunciator boxes, push buttons, rotary knobs, and red On-Off switches—everything you need except the wiring harness and housing.
A: Yes, it features warm white backlighting with a dedicated 12-volt connector, allowing easy integration with lighting systems in your cockpit.
A: Very easy! The backside of the PCB includes an IDC connector with each pin clearly labelled and assigned to specific panel functions. A datasheet is available for download to assist with wiring.
A: Absolutely. Its authenticity and durability make it an excellent choice for flight schools aiming to provide realistic training scenarios.
A: The panel measures 194.5 mm by 207 mm, matching Cessna 172 specifications closely.
Take your flight simulation and training cockpit to new heights with the Simbay G1000 Side Panel Cessna 172 replica. Order now and experience unmatched realism and functionality in your setup!
This set includes the front and back panels, all annunciators, knobs, and switch guards.
Note: No electronic components are included. You will need to purchase switches, toggle switches, rotary switches, encoders, or potentiometers separately.
This is a fully functional unit that must be connected via the IDC connector pins on the back of the PCB to a controller board. Programming is required.
Pin layout information is either printed on the PCB or provided in a separate datasheet.
This version comes pre-programmed and USB-ready for use with your preferred flight simulation software.
Simply plug it in, install the provided configuration files, and you’re ready to fly!
Power Supply Note:
Because the panels can be daisy-chained using their power connectors, single-panel products do not include a 12V power adapter. Only one adapter is required to power your entire custom cockpit setup. The power supply is used solely for the backlighting, not for the product’s core functions.
All knobs are high-quality, resin 3D-printed components with realistic designs. They are supplied with a D-shaft fitting.
For modifications or custom requirements, please contact our support team.
The gauges are powered by SG90 servo motors, compatible with most available controller boards. Each unit includes one or two pre-mounted servo motors.
Calibration must be done via your software or firmware.
Where specified, we use 28BY stepper motors with a ULN2003 driver board.
Electronics are available as complete packages or individual components. When selecting a color or type, you will receive the specified quantity of the chosen product.
PCB Only: Includes just the bare PCB. You can order components separately.
PCB + Electronic Components: Includes a blank PCB plus all necessary components for you to solder.
Soldered PCB: Fully soldered and tested by us. Ready to connect to your controller board and program.
Este juego incluye los paneles frontal y posterior, todos los anunciadores, los mandos y los protectores de los interruptores.
Nota: No se incluyen componentes electrónicos. Deberá adquirir interruptores, conmutadores de palanca, interruptores giratorios, codificadores o potenciómetros por separado.
Se trata de una unidad totalmente funcional que debe conectarse a una placa controladora a través de las patillas del conector IDC situado en la parte posterior de la placa de circuito impreso. Se requiere programación.
La información sobre la disposición de los pines está impresa en la placa de circuito impreso o se proporciona en una hoja de datos aparte.
Esta versión viene preprogramada y preparada para USB para utilizarla con su software de simulación de vuelo preferido.
Sólo tiene que conectarla, instalar los archivos de configuración suministrados y ¡listo para volar!
Nota sobre la fuente de alimentación:
Dado que los paneles pueden conectarse en cadena utilizando sus conectores de alimentación, los productos de panel único no incluyen un adaptador de alimentación de 12 V. Sólo se necesita un adaptador para alimentar toda la configuración personalizada de la cabina. La fuente de alimentación se utiliza únicamente para la retroiluminación, no para las funciones principales del producto.
Todos los mandos son componentes de alta calidad impresos en 3D con resina y diseños realistas. Se suministran con un accesorio de eje en D.
Para modificaciones o requisitos personalizados, póngase en contacto con nuestro equipo de asistencia.
Los indicadores funcionan con servomotores SG90, compatibles con la mayorÃa de las tarjetas controladoras disponibles. Cada unidad incluye uno o dos servomotores premontados.
La calibración debe realizarse a través de su software o firmware.
Donde se especifica, utilizamos motores paso a paso 28BY con una placa de controladores ULN2003.
Los productos electrónicos están disponibles en paquetes completos o como componentes individuales. Al seleccionar un color o tipo, recibirá la cantidad especificada del producto elegido.
Sólo PCB: Incluye sólo la PCB desnuda. Puedes pedir los componentes por separado.
PCB + Componentes Electrónicos: Incluye una PCB en blanco más todos los componentes necesarios para que puedas soldar.
PCB soldada: Totalmente soldada y probada por nosotros. Listo para conectar a la placa controladora y el programa.
Reviews
There are no reviews yet